Matrix Telecom Solutions

This page has been permanently moved to PROTON/

Proton206
2 Trunks x 6 Extensions

>>	Introduction
>>	Key Features
>>	Features List
>>	Technical Specifications
>>	Product Range - SMB PBX

>> Downloads

Proton206 Brochure

>> Request for Information

Introduction

Enhanced productivity and cost reduction are crucial factors for the success of business organizations. Operating in the present day challenging environment, a smart communication system can be a great asset. Opting for a smart, efficiency enhancing and cost effective PBX like Matrix Proton is a right step towards it.

Proton provides ample number of extensions, so that members of your organization can communicate (externally as well as internally) more effectively and efficiently.

It possesses features like Allowed and Denied Lists, Dynamic Lock and Automatic Call Disconnector, which help an organization to keep a tab on the mounting communication costs. Its features like Auto Redial, Conference and External Call Forwarding enhance productivity multifold.

The Proton’s micro controller based design and state-of-the-art Surface Mount Technology (SMT) ensures high reliability and low maintenance cost.

Key Features

^ TOP

Allowed and Denied Lists
Allows you to specify list of numbers that are allowed and denied for each extension. Thus preventing misuse of extensions for calls with 95, to mobile or outstation calls.

Automatic Call Disconnector
Disconnects a call once the defined time is over. This function greatly reduces long, unnecessary phone calls and keeps the expenses on telephone in check.

Auto Redial
Redials an external number and intimates you when it gets through. Thus saving your time and effort to call a number which is engaged.

Auto Shut Dynamic Lock
A utility feature, it locks the extension for STD or any trunk after a pre-defined period, thus preventing any misuse of the lines.

Conference
Allows 3 party conference with other extensions or trunks. Enhancing teamwork and better communication.

External Call Forwarding
The system can be programmed such that all incoming calls are forwarded to another number. Thus ensuring that you do not miss important calls, even when the office is closed.

Walk in Class of Service
Allow station user to use his toll control level from any other station. So get better utilization of resources, no misuse of features, less time wastage.

Features List

^ TOP

Abbreviated Dialing (Global, Personal)	Executive/Secretary
Alarms (Duration, Remote)	External Call
Allowed and Denied Lists	External Call Forwarding (ECF)
Auto Call Back (Busy, No Reply)	Flash Timer
Auto Redial	Flexible Numbers
Barge-In	Hotline
Behind the PBX Application	Hunting Schemes
Boss Ring	Internal Call
Call Duration Control	Internal Call Restriction
Call Follow-Me	Interrupt Request
Call Forward (All Calls, If Busy, If No Reply)	Last Number Redial
Call Hold	Message Wait
Call Park	Music On Hold (MOH)
Call Pick Up (Group, Selective)	Private Trunk
Call Progress Tones (CPT)	Power Down Mode
Call Splitting	Privacy
Call Transfer	Raid
Class of Service (COS)	Remote Programming
Conference	Selective Trunk Access
Continued Dialing	System Security (Pass Word)
Demonstration of Tones	Toll Control
Department Call	Trunk Reservation
Direct Inward Dialing (DID)	Universal Serial Number
Direct Outward System Access (DOSA)	Virtual Stations
Distinctive Ringing	Voice Mail Integration
Do Not Disturb (DND)	Walk-In Class of Service
Dynamic Lock

Technical Specifications

^ TOP

Telephony Interface	: 2 CO Lines (FXO) for Analog PSTN/CO Connectivity
	: 6 Stations (FXS) for Phone, Modem, Fax Connectivity
Internet Port	: Direct CO Connection for External Modem to avoid Speed-Loss
DTMF Decoder	: 2
Speech Paths	: 3

Transmission Parameters
Return Loss	: More than 18dB
Insertion Loss	: Less than 2dB
Inter-Channel Cross-Talk	: Less than -65dBmOp
Idle Channel Noise	: Less than -65dBm
Longitudinal Balance	: Better than 40dB

Switching	: Space Division CMOS Cross point Switch

CO Lines (FXO)
Off Hook Line Impedance	: 600
Loop Limit	: 1500
Pulse Dialing	: 10 PPS +/- 5%, Make/Break =33:67
DTMF Dialing and Detection	: As per ITU-T Q.23 & Q.24
Protection	: Solid State (Over Voltage and Over Current Protection)
Connectivity	: Push-type (Single Pair Wire, 0.5mm/0.019inch)
Power Failure Transfer	: All CO Lines to Fixed Stations

Stations Lines (FXS)
Loop Limit	: 250 (Max.) Excluding Telephone
Loop Current	: 35mA Max.
Ring Voltage	: 50Vrms, 25Hz
Off Hook Line Impedance	: 600
Pulse Detection	: 10 PPS +/- 5%, Make/Break=33:67
DTMF Detection	: As per ITU-T Q.24
Protection	: Solid State (Over Voltage Protection)
Connectivity	: Push-Type (Single Pair Wire, 0.5mm/0.019inch)

Power Supply
Mains	: 90-265 V AC, 47-63 Hz
Power Consumption (Typical)	: 10W

Mechanical
Dimensions (WxHxD)	: 260 Х 280 Х 75 mm (10.24 Х 11.02 Х 2.95”)
Unit Weight	: 1.3 kg (2.8 lb)
Installation	: Wall Mount

Environmental
Operating Temperature	: 0°C to +55°C (34°F to +131°F)
Operating Humidity	: 5-95% RH, Non-Condensing
Storage Temperature	: -40º C to + 85º C(-40º F to 185º F)
Storage Humidity	: 0-95% RH, Non-Condensing

Product Range - SMB PBX

^ TOP

Proton103	1 Trunk Line and 3 Extension Line PBX
Proton205	2 Trunk Line and 5 Extension Line PBX
Proton206	2 Trunk Line and 6 Extension Line PBX
Proton308	3 Trunk Line and 8 Extension Line PBX
Vision206S	2 Trunk Line and 6 Extension Line PBX with Standard Features
Vision308S	3 Trunk Line and 8 Extension Line PBX with Standard Features
Vision309P	3 Trunk Line and 9 Extension Line PBX with Premium Features
VisionUltra206P	2 Trunk Line and 6 Extension Line PBX with Premium Features
VisionUltra308P	3 Trunk Line and 8 Extension Line PBX with Premium Features
VisionUltra412P	4 Trunk Line and 12 Extension Line PBX with Premium Features
VisionUltra616P	6 Trunk Line and 16 Extension Line PBX with Premium Features
Cosine32P	Digital Key Phone System for Mid-size Business Expandable up to 21 Ports
Cosine64P	Digital Key Phone System for Mid-size Business Expandable up to 52 Ports